Torque tube anchor point

[Nick Salmon]

Please forgive me putting this on the main forum as well as the 'wants' (which I know some do not look at).

I'm changing the whole of the back axle on my Ruby. Currently has a ball type torque tube anchor point on the chassis crossmember. The replacement axle torque tube anchor is of the later type with a silentbloc bushed/bolt.

Has anyone got a later type torque tube anchor crossmember mounting brackets they would part with please?

[Howard Wright]

Hi Nick 

I think David has these (1A5523). But I may be wrong.

I made up a pair from thick angle section for my special. Perhaps not for the purist?

Cheers

Howard

[dickie65]

Just swap the mount from the old axle to the new one and keep the original ball mount.

[David Cochrane]

I think David has these (1A5523). But I may be wrong.

You are not wrong! I also stock the Silentbloc bush.