The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.31 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval



Austinsevenfriends › Austin Seven Friends Forum › Forum chat... v
LARGE END STEERING BUSH,

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Threaded Mode
LARGE END STEERING BUSH,
Rpm Offline
Senior Member
****
Joined: Sep 2018 Posts: 255 Threads: 67
Reputation: 1
#1
10-09-2021, 01:06 PM
Hi Forum, A question on the large Nut/ Bush. Does it come out, or is it machined into the box?
Regards RPM    
Reply
Robert Leigh Offline
Posting Freak
*****
Joined: Aug 2017 Posts: 926 Threads: 22
Reputation: 10
Location: Near Cambridge, UK
Car type: 1928 tourer (mag type), short chassis Gould Ulster
#2
10-09-2021, 04:23 PM
The nut does come off, but you have to carefully drill into the dot punch marks a little until it will turn.
Reply
Chris KC Offline
GO 6285
*****
Joined: Aug 2017 Posts: 3,393 Threads: 106
Reputation: 28
Location: Darkest Bedfordshire
#3
10-09-2021, 05:33 PM
Hope you are taking notes Robert - I'll quiz you on this later!
Reply
Rpm Offline
Senior Member
****
Joined: Sep 2018 Posts: 255 Threads: 67
Reputation: 1
#4
10-09-2021, 06:00 PM
Robert, what comes off after drilling the punch indents out, the whole thing or just the brass part?
Chris. Quiz me once it's off.
Another question, are the worm parts the same on all steering columns of the same type box. 36
Regards
Reply
Robert Leigh Offline
Posting Freak
*****
Joined: Aug 2017 Posts: 926 Threads: 22
Reputation: 10
Location: Near Cambridge, UK
Car type: 1928 tourer (mag type), short chassis Gould Ulster
#5
10-09-2021, 08:50 PM
The brass part is attached to the stator tube which comes out upwards when the nut is off. The stator tube has to be fixed against rotation so that there is a fixture at the top for the levers to operate against.
Reply
Rpm Offline
Senior Member
****
Joined: Sep 2018 Posts: 255 Threads: 67
Reputation: 1
#6
10-09-2021, 09:52 PM
Thanks, Robert. Will have a go. Regards Rpm.
Reply
Tony Press Offline
Older Member
*****
Joined: Aug 2017 Posts: 1,746 Threads: 42
Reputation: 15
Location: Malvern, Victoria, Australia
#7
11-09-2021, 02:57 AM
As mentioned before- screw down the worm onto the brass bush flange inside the box to stop the bush  turning when undoing the nut.
http://austin7club.org
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)