Joined: Aug 2017 Posts: 1,808 Threads: 99
Reputation:
21
05-01-2019, 08:07 PM
(This post was last modified: 05-01-2019, 08:10 PM by Tony Betts.)
Christmas just a little late today.
Had a delivery of 4 cranks and 10 sets of rods.
Bee waiting for over three years for these.
And this time I GET TO KEEP ONE.
[attachment=4993]
This is the main ingredient for my idea of a very fast perfect engine.
Mine is number 10 from the batch.
[attachment=4994]
And this is it.
A fully counterbalanced HADLEY crank.
[attachment=4995]
And matching set of HADLEY rods.
[attachment=4996]
Joined: Mar 2015 Posts: 5,466 Threads: 231
Reputation:
67
Location: Scotchland
Nice one Tony - what will it go in?
Joined: Aug 2017 Posts: 1,539 Threads: 61
Reputation:
20
Lovely Tony.
The premium Austin 7 crankshaft solution!
Charles
Joined: Aug 2017 Posts: 314 Threads: 9
Reputation:
6
Location: TINOPAI NZ
HI Tony,
Would recommend the Rods they are TOP END well finished and perfectly Balanced
and happy to enlarge small end to 15mm for me
Colin
NZ
Joined: Mar 2015 Posts: 5,466 Threads: 231
Reputation:
67
Location: Scotchland
A dream to fit, I agree Colin, top notch.
Joined: Aug 2017 Posts: 1,808 Threads: 99
Reputation:
21
Hi R,
I travel the usa every year.
But it's always been a dream to take say 4 months in a camper with a seven on the back to take in as much as I can. Across the states coast to coast.
Including the bonnaville salt flats. Hopefully registering a seven for a run.
What I'll put the engine in? I'm not quite sure. Something I already have. Or even, I have an idea for a special, and even some parts ive saved up?
And Colin, I'm glad you like the rods.
I'm happy to be able to say I had quite a bit of input in the rods being made, along with two other. Peter Pearson, and Tony white.
There is more to them, than anyone would realise.
Tony.
Joined: Mar 2015 Posts: 5,466 Threads: 231
Reputation:
67
Location: Scotchland
Sounds right up my street Tony - are these the same design rods as your previous Hadley ones? Those were a dream to fit.
Joined: Aug 2017 Posts: 1,808 Threads: 99
Reputation:
21
Hi R,
Exactly the same.
Usually I only get the rods done at the same time as the counterbalanced cranks.
So the rods are out of stock for large periods of time. Well years at a time.
They are not cheap to have made, sadly very little profit for me as a business.
I used to do the same rod and a standard crank in an 1 5/16 as the kiddy crank and rods. But the cranks are expensive and massively slow to get made. The rods were also not cheap, but did come in a lot quicker. In short a lot of bother for little gain.
Tony.
