Nickel plating

[jboy964]

Searching for recommendations for nickel plating please.

Thanks, John

[Stuart Joseph]

Hello John, where are you located?

Regards from the creative county - Staffordshire

Stuart

[jboy964]

Hello John, where are you located?

Regards from the creative county - Staffordshire

Stuart

Hello Stuart, I’m in Norfolk, Nelson’s county!

Thanks, John

[Stuart Joseph]

Thanks John, the reason I asked was that I think it important to take and collect goods from platers but the trek to Staffs from Norfolk is perhaps too far.

Regards

Stuart

[Rick F]

Hi John - I always use Wyatt Polishing (Tony Burgess) at 18 Telford Way Industrial Estate, Thetford, Norfolk IP24 1HU.  01842 766770. Unfortunately their website is down at the moment.

[jboy964]

Hi John - I always use Wyatt Polishing (Tony Burgess) at 18 Telford Way Industrial Estate, Thetford, Norfolk IP24 1HU.  01842 766770. Unfortunately their website is down at the moment.

Hi Rick,

Thanks, yes I have tried Wyatts. They are quoting a ridiculous turnaround time, 20 weeks.

[Nigel]

Get a kit from Gateros plating and do it yourself - works well.

[AllAlloyCup]

Small parts like handles , instrument rims
etc are relatively easy to do at home with a
Kit of chemicals. See my previous thread.

Bumpers and rad shells are best left to the professionals.
Regards

Bill G

Aka AllAlloyCup