+- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum)
+-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: Nickel plating (/showthread.php?tid=2133)
Nickel plating - jboy964 - 17-12-2018
Searching for recommendations for nickel plating please.
Thanks, John
RE: Nickel plating - Stuart Joseph - 17-12-2018
Hello John, where are you located?
Regards from the creative county - Staffordshire
Stuart
RE: Nickel plating - jboy964 - 17-12-2018
(17-12-2018, 04:45 PM)Stuart Joseph Wrote: Hello John, where are you located?
Regards from the creative county - Staffordshire
Stuart
Hello Stuart, I’m in Norfolk, Nelson’s county!
Thanks, John
RE: Nickel plating - Stuart Joseph - 17-12-2018
Thanks John, the reason I asked was that I think it important to take and collect goods from platers but the trek to Staffs from Norfolk is perhaps too far.
Regards
Stuart
RE: Nickel plating - Rick F - 18-12-2018
Hi John - I always use Wyatt Polishing (Tony Burgess) at 18 Telford Way Industrial Estate, Thetford, Norfolk IP24 1HU. 01842 766770. Unfortunately their website is down at the moment.
RE: Nickel plating - jboy964 - 18-12-2018
(18-12-2018, 01:27 AM)Rick F Wrote: Hi John - I always use Wyatt Polishing (Tony Burgess) at 18 Telford Way Industrial Estate, Thetford, Norfolk IP24 1HU. 01842 766770. Unfortunately their website is down at the moment.
Hi Rick,
Thanks, yes I have tried Wyatts. They are quoting a ridiculous turnaround time, 20 weeks.
RE: Nickel plating - Nigel - 18-12-2018
Get a kit from Gateros plating and do it yourself - works well.
RE: Nickel plating - AllAlloyCup - 18-12-2018
Small parts like handles , instrument rims
etc are relatively easy to do at home with a
Kit of chemicals. See my previous thread.
Bumpers and rad shells are best left to the professionals.
Regards
Bill G
Aka AllAlloyCup