Wheels nuts

[GrahamW]

Thanks for the pointers on the nuts

[Stumpi]

I would avoid aeronuts as they tend to damage the stud thread,I have been using nylocs  for 30years with no problems on my trials car and I use a torque wrench when possible.the only problem I have encountered is that the drum relies on the countersunk screws for location,so have reduced the stud hole so it’s a good fit on studs using a stainless bush in drum.
Andy

[Peter Johnson]

+1 recommendation for the washers made by Alistair Frayling-Cork which I have used on my cup model in VSCC sprints and hill climbs. Absolutely worth the money.

[GrahamW]

Does anyone have contact details for Charlie Plain Jones ?

[Hugh Barnes]

Message sent, Graham....