15-09-2023, 09:32 AM
(This post was last modified: 15-09-2023, 09:35 AM by Hugh Barnes.)
That, as they say Dave, is the right answer...
Thanks so much, I shall forge ahead..
cheers...
Edit: Actually, I was taught a tip from tech support at Evostick a while back. If you make up a 'primer' of evostick let down with some of the Evostick Cleaner/solvent and pre-coat the two surfaces to touch dry, *then* use the Evostick, you get much better adhesion.. Seems to work...
Thanks so much, I shall forge ahead..
cheers...
Edit: Actually, I was taught a tip from tech support at Evostick a while back. If you make up a 'primer' of evostick let down with some of the Evostick Cleaner/solvent and pre-coat the two surfaces to touch dry, *then* use the Evostick, you get much better adhesion.. Seems to work...