03-08-2021, 04:51 PM
Advice please.
I've found that on the 1927 Chummy the clutch pedal lever is rotating on the shaft.
I have tried tightening the pinch bolt ( I assume it is a pinch bolt) but it feels as if the thread has gone.
It is impossible to remove the bolt as it will foul on the chassis so I presume the answer is to undo engine mounting bolts etc and raise the engine/gearbox and inch or more so the bolt can come out. Assuming the thread has gone, shall I replace the bolt with a nut and bolt arrangement?
I've found that on the 1927 Chummy the clutch pedal lever is rotating on the shaft.
I have tried tightening the pinch bolt ( I assume it is a pinch bolt) but it feels as if the thread has gone.
It is impossible to remove the bolt as it will foul on the chassis so I presume the answer is to undo engine mounting bolts etc and raise the engine/gearbox and inch or more so the bolt can come out. Assuming the thread has gone, shall I replace the bolt with a nut and bolt arrangement?