09-12-2017, 08:33 PM
(09-12-2017, 09:27 AM)Hugh Barnes Wrote: Well, the Workshop has a complete range of sizes up to and including +.080 for £168 it would seem. There is always a risk associated with +.080 that the cylinder walls could be getting very thin (depending on the block casting) so be wary of that...
Hi Hugh
Thanks for response, I do buy from Jamie.
His largest oversize is .080"
58mm = .083" I need that extra .003" to get rid of some light rust pitting.
I could run his Pistons with extra clearance but not ideal.