08-12-2017, 08:17 PM
(This post was last modified: 09-12-2017, 11:41 PM by Zetomagneto.
Edit Reason: Wrong size piston required
)
Went to collect my block from boring today, unfortunately it didn't clean up at .060" and will apparently need liners, or bore to .080".
I preference the latter, does anyone have a set of 58mm pistons they would like to sell, or trade for a new unused set of .060" pistons .
Tony is out of 58mm and I don't want to spend £220 on a set from one of our other cherished suppliers before exploring other possibilities.
I do have another block at .020" but don't want to bore that to .060" it would be a waste of good metal
I preference the latter, does anyone have a set of 58mm pistons they would like to sell, or trade for a new unused set of .060" pistons .
Tony is out of 58mm and I don't want to spend £220 on a set from one of our other cherished suppliers before exploring other possibilities.
I do have another block at .020" but don't want to bore that to .060" it would be a waste of good metal