03-02-2020, 10:10 PM
(This post was last modified: 03-02-2020, 10:15 PM by Robert Leigh.
Edit Reason: typo
)
The pictures show my home made remote gear change. It is fixed rigidly to the gearbox with its three point mounting, using longer than standard bolts, and the lever end is entirely clear of the tunnel, so that the whole change mechanism moves with the rubber mounted engine. Gear selection uses the standard gate, and only differs in that the lever is pushed down for selecting reverse, with a nylon rocker block halfway along the stainless steel tunnel.
Robert Leigh
Robert Leigh