02-02-2019, 07:00 PM
(This post was last modified: 02-02-2019, 07:02 PM by Zetomagneto.
Edit Reason: More
)
(02-02-2019, 06:01 PM)Colin Wilks Wrote: These are the bolts with a chamfered and rounded head and with a pin just below the head that engages in a slot in the big end cap.
Need a set of eight for my rebuild please.
Hi Colin, I think you posed this question a while ago.
Can you use caphead 5/16 UNF Bolts with these nuts
https://www.burtonpower.com/5-16-unf-12-...-8301.html
Bolt up through with nuts at the top.This is a suggestion, I hav not done it but see no reason why it wont work.
Best Wishes Gene