05-01-2019, 11:58 PM
Hi R,
Exactly the same.
Usually I only get the rods done at the same time as the counterbalanced cranks.
So the rods are out of stock for large periods of time. Well years at a time.
They are not cheap to have made, sadly very little profit for me as a business.
I used to do the same rod and a standard crank in an 1 5/16 as the kiddy crank and rods. But the cranks are expensive and massively slow to get made. The rods were also not cheap, but did come in a lot quicker. In short a lot of bother for little gain.
Tony.
Exactly the same.
Usually I only get the rods done at the same time as the counterbalanced cranks.
So the rods are out of stock for large periods of time. Well years at a time.
They are not cheap to have made, sadly very little profit for me as a business.
I used to do the same rod and a standard crank in an 1 5/16 as the kiddy crank and rods. But the cranks are expensive and massively slow to get made. The rods were also not cheap, but did come in a lot quicker. In short a lot of bother for little gain.
Tony.