01-10-2017, 11:44 AM
After reading this thread, I thought I would have a go at this. http://www.austin7.org/Technical%20Artic...20removal/
It worked very well on steel components, but not to well on the piece of cast alloy I tried as it still came out with a dull Finnish. But it is cheep and cheerful and well worth having a play with. The components will still need to be cleaned up with a wire brush but it does get the deeper bits of rust out of the holes that the brush leaves behind.
It worked very well on steel components, but not to well on the piece of cast alloy I tried as it still came out with a dull Finnish. But it is cheep and cheerful and well worth having a play with. The components will still need to be cleaned up with a wire brush but it does get the deeper bits of rust out of the holes that the brush leaves behind.