Maybe a stupid question but I can't recall for certain aren't the sump bolts in blind holes in the crankcase? I know most are, but can't recall if the front ones are too? If they are and if the gasket joint is OK then no oil should be anywhere to track up the threads, with a tin sump I think I'd prefer to use the correct mildly spreading washers to help spread the load on the flange in the hope of it staying flat.
|
Sump gasket
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Sump gasket - by Tiger - 27-10-2018, 02:27 PM
RE: Sump gasket - by rubyman - 27-10-2018, 02:58 PM
RE: Sump gasket - by Zetomagneto - 27-10-2018, 03:05 PM
RE: Sump gasket - by Steve Bryant - 27-10-2018, 03:07 PM
RE: Sump gasket - by Ruairidh Dunford - 27-10-2018, 04:00 PM
RE: Sump gasket - by bob46320 - 27-10-2018, 04:06 PM
RE: Sump gasket - by John Raeburn - 27-10-2018, 04:08 PM
RE: Sump gasket - by Tiger - 27-10-2018, 05:36 PM
RE: Sump gasket - by John Raeburn - 28-10-2018, 06:44 AM
RE: Sump gasket - by Steve Bryant - 28-10-2018, 12:44 AM
RE: Sump gasket - by Bob Culver - 28-10-2018, 09:26 AM
RE: Sump gasket - by Tiger - 30-10-2018, 08:01 AM
RE: Sump gasket - by Bob Culver - 30-10-2018, 06:36 PM
RE: Sump gasket - by Timothy P - 31-10-2018, 12:53 PM
RE: Sump gasket - by Timothy P - 31-10-2018, 09:48 PM
RE: Sump gasket - by Bob Culver - 01-11-2018, 02:04 AM
RE: Sump gasket - by Tiger - 01-11-2018, 07:48 AM
RE: Sump gasket - by Zetomagneto - 01-11-2018, 08:50 AM
|
Users browsing this thread: 7 Guest(s)