The following warnings occurred: | |||||||||||||||
Warning [2] Undefined property: MyLanguage::$archive_pages - Line: 2 - File: printthread.php(287) : eval()'d code PHP 8.1.31 (Linux)
|
Sump gasket - Printable Version +- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum) +-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1) +--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14) +--- Thread: Sump gasket (/showthread.php?tid=1934) Pages:
1
2
|
Sump gasket - Tiger - 27-10-2018 I am sure you are fed up with this question but what’s the best method to achieve a Seal on the Ruby sump. Bearing in mind removal for oil change. Regards Tim RE: Sump gasket - rubyman - 27-10-2018 (27-10-2018, 02:27 PM)Tiger Wrote: I am sure you are fed up with this question but what’s the best method to achieve a The last twice I have had my sump off I have sealed it with Blue Hylomar and never had a leak RE: Sump gasket - Zetomagneto - 27-10-2018 (27-10-2018, 02:58 PM)Yrubyman Wrote:(27-10-2018, 02:27 PM)Tiger Wrote: I am sure you are fed up with this question but what’s the best method to achieve a Silicone sump gasket from Jamie at Seven Workshop, no need to use messy unsightly goo. RE: Sump gasket - Steve Bryant - 27-10-2018 Zeto is there a part number for that gasket from Seven Workshop? It isn't listed on their online catalog. Stephen RE: Sump gasket - Ruairidh Dunford - 27-10-2018 Here you are Steve: https://www.theaustinsevenworkshop.com/search?query=Silicone RE: Sump gasket - bob46320 - 27-10-2018 How many times do you take your sump off ? With modern oils and regular changes, I would remove and clean the gauze perhaps every 50,000 miles. RE: Sump gasket - John Raeburn - 27-10-2018 (27-10-2018, 02:27 PM)Tiger Wrote: I am sure you are fed up with this question but what’s the best method to achieve a Tim, Why would you want to take the sump off for an oil change? J RE: Sump gasket - Tiger - 27-10-2018 So no need to clean the filter ? Only after high mileage RE: Sump gasket - Steve Bryant - 28-10-2018 (27-10-2018, 04:00 PM)Ruairidh Dunford Wrote: Here you are Steve: https://www.theaustinsevenworkshop.com/search?query=Silicone Thank you Ruairdh. Most appreciated. Cheers, Stephen RE: Sump gasket - John Raeburn - 28-10-2018 (27-10-2018, 05:36 PM)Tiger Wrote: So no need to clean the filter ? Tim. The "Filter" is a fine wire mesh, which does no more than preventing the odd nut and bolt, twig, or fag end from getting into the pump! Once you have an oil tight sump leave well alone, a regular oil change is all you need. Sumps tend to leak because they have been over tightened, which tends to distort the flange around each stud hole, make sure that it is perfectly flat before fitting. J |