30-10-2018, 06:36 PM
If using a plain steel washer as well it must be atight fit and seal the screw shank, problematic with a setscrew (bolt threaded to the head)
|
Sump gasket
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Sump gasket - by Tiger - 27-10-2018, 02:27 PM
RE: Sump gasket - by rubyman - 27-10-2018, 02:58 PM
RE: Sump gasket - by Zetomagneto - 27-10-2018, 03:05 PM
RE: Sump gasket - by Steve Bryant - 27-10-2018, 03:07 PM
RE: Sump gasket - by Ruairidh Dunford - 27-10-2018, 04:00 PM
RE: Sump gasket - by bob46320 - 27-10-2018, 04:06 PM
RE: Sump gasket - by John Raeburn - 27-10-2018, 04:08 PM
RE: Sump gasket - by Tiger - 27-10-2018, 05:36 PM
RE: Sump gasket - by John Raeburn - 28-10-2018, 06:44 AM
RE: Sump gasket - by Steve Bryant - 28-10-2018, 12:44 AM
RE: Sump gasket - by Bob Culver - 28-10-2018, 09:26 AM
RE: Sump gasket - by Tiger - 30-10-2018, 08:01 AM
RE: Sump gasket - by Bob Culver - 30-10-2018, 06:36 PM
RE: Sump gasket - by Timothy P - 31-10-2018, 12:53 PM
RE: Sump gasket - by Timothy P - 31-10-2018, 09:48 PM
RE: Sump gasket - by Bob Culver - 01-11-2018, 02:04 AM
RE: Sump gasket - by Tiger - 01-11-2018, 07:48 AM
RE: Sump gasket - by Zetomagneto - 01-11-2018, 08:50 AM
|
Users browsing this thread: 7 Guest(s)