Rear Blind for 1932 RP

[GK5268]

As a stop-gap, but the reality is that it will probably be permanent, for my Ruby, I used a modern car "sun" blind, these are as cheap as chips (fiver) and surprisingly not that badly made. The bar is metal, but the mounting clips are plastic but not really that intrusive. I got a blind to the correct width of the window and then cut the mesh down to the right drop, keeps the bulk to a minimum when furled.


Hi Gary, I like the fabric solution you have found and the spring mechanism. I wonder if you are able to identify the source please?

it was on eBay, loads come up, just check the width (some quote drop not width, which is confusing) and look at what has the best amount of metal in it, some are all plastic. When I got mine, I took it to bits, cut off the surplus fabric and re-assembled, easy enough to do, screw-eyes are readily available, as is a cord, used existing screw fixings to secure in position. Quite a neat solution imho!