help how do you reaassemble a rear window and rubber for a 1936 austin ruby

[Nigel was in Brittany]

What I did with mine was put the glass into the rubber and fitted the glass from inside the car with a coating of black Stixall ,then with a bit of 2x1 screwed across the glass to retain it until the Stixall cured. When I had held it in tight with the 2x1 I used a garage wet wipe to remove any residue from the exterior paint work.

   Todays top tip : if you are siliconeing around a basin etc , use a wet wipe to go over the silicone rather than your wetted finger, it leaves a lovely finish.