14-05-2018, 08:17 PM
w ideally, plus a good jig saw and a belt sander,
Plus power drill screwdriver. I joined a local Men’s Shed and had good acccess both to tools
And helpers! The metal body mounts are relatively easily fabricated but d need some welding
That cost me £15!
I used the chassis as a jig. Modifying the Swb plans to suit a LWB is a bit tricky but doable.
I’ve made two frames and recently just sold one.
Regards
Bill g
Plus power drill screwdriver. I joined a local Men’s Shed and had good acccess both to tools
And helpers! The metal body mounts are relatively easily fabricated but d need some welding
That cost me £15!
I used the chassis as a jig. Modifying the Swb plans to suit a LWB is a bit tricky but doable.
I’ve made two frames and recently just sold one.
Regards
Bill g
Based near the Scottish Border,