Joined: Jul 2018 Posts: 102 Threads: 33
Reputation:
1
Hello everyone after radio silence for quite a while I return with a question, how tight should the Bolts holding the castlated disc on be on the later torque tube (silentbloc) as when I have them nipped up there is a whining noise when driving like a noisy diff and when pulling away a judder however when loose (a lot more than I feel comfortable leaving it) the juddering stops nearly completely and the whining quietens a lot! Just double checking I’m not missing anything out!
Hope to hear back!
Joined: Dec 2017 Posts: 1,160 Threads: 68
Reputation:
8
Location: Nottinghamshire. Robin Hood County
Car type: Austin Ruby Mk1 1935
Hi, All I can tell you is don’t over tighten them. A previous owner on my car has tightened the studs too tight causing the castlated disc to warp and I am now unable to adjust the disc. I suspect is has made it go cross threaded.
John Mason.
Would you believe it "Her who must be obeyed" refers to my Ruby as the toy.
Joined: Aug 2017 Posts: 327 Threads: 1
Reputation:
19
Location: Bristol
The bolts only stop the adjuster unscrewing they should not be tight, fit self locking nuts to the bolts and fit a grease nipple in the top of the ball bracket. Terry
