| The following warnings occurred: | ||||||||||||
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.30 (Linux)
|
|
Inline fuel filter
|
05-02-2020, 09:25 PM
Hi all, I am considering fitting an in-line fuel filter to my Ruby. All the filters I have found are for plastic/rubber petrol pipe as are fitted to moderns. Does anybody know of a source where I can get one with connections to copper fuel pipe.
John Mason.
Would you believe it "Her who must be obeyed" refers to my Ruby as the toy.
05-02-2020, 11:00 PM
Hi John
I picked up one at Beaulieu a couple years ago. I think it was on one of the many motorcycle orientated stalls. I think I paid a tenner for it! Cheers Howard 
06-02-2020, 08:55 AM
On a Ruby you should have a fine filter in the fuel pump and another within the carb banjo fitting. This should be adequate .
I am always interested in any information about Rosengart details or current owners.
06-02-2020, 10:22 AM
Derek, You are correct in what you say but something keeps clogging up my carb jets. I will investigate further.
John Mason
Would you believe it "Her who must be obeyed" refers to my Ruby as the toy.
06-02-2020, 07:15 PM
I have not been able to find filters for the "Banjo" pipe to carb union for the 30VE1 nor FZB22 nor 24T2 (does it have one?? I cannot recall!) I have fitted a modern in line filter on the 1928 AD with it's 24T2 carb- it was sensitive to angle - and pre war motor cycle type filters to the other two.
06-02-2020, 07:44 PM
I can see using in line filter in gravity fed systems , have fitted a glass bowl type ad shown above in my Chummy. I don’t know if the banjo filters are available but I make my own, can supply a few at a fiver a pop.! They were 6d each in 1937 which I think you will find equates to somewhere near a fiver today.
I am always interested in any information about Rosengart details or current owners.
|
|
« Next Oldest | Next Newest »
|
