NIPPY SCREEN TOGGLES

[Rpm]

Hi all ,may I ask someone to post a picture of the Nippy Rattle toggles on the windscreen corners. Im assuming these are not available as a reproduction items.
I also want to make Nippy doors locks, unless someone can help with these items. Can hear you lauging already.
Thanks all.
Regards Rob

[Chris KC]

Rob, 

You need to talk with Chris Gould  - he actually wrote a guide to reproducing Nippy door catches.

https://aus7in.wordpress.com/2016/08/22/door-locks/

[daveg]

I am not sure which bits are the "rattle toggles" but there are some pictures here of Nippy windscreens that might help.

https://aus7in.wordpress.com/2016/06/08/...ariations/

[daveg]

Thinking more about it I wonder if this is what you need, I have always referred to it as an acorn


  Acorn.JPG (Size: 120.87 KB / Downloads: 134)

If so I bought some from Willie Mckenzie, Austin Repro.

http://austinrepro.com/

[Rpm]

Thanks, Chris, Dave. will see if I can gain more info on door catches, C.guold. Re the windscreen, its the turn catches each end of the screen, which I assume stops screen rattle and also stops it opening .The catches are mounted on the outside bottom each end.
Regards Rob

[daveg]

I think I now know what you need


  Tog1.JPG (Size: 55 KB / Downloads: 103)


  Tog2.JPG (Size: 46.25 KB / Downloads: 103)

Willie also supplied me with these and the stepped screw to attach them.

[EB65 VN]

Exactly as I was able to obtain, from the same excellent source!

[Rpm]

Thanks Guys , does Chris Gould supply these toggles? great to see a close-up. least i now know what they look like.
Regards Rob