+- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum)
+-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: Valve Chest Oil Seal (/showthread.php?tid=9824)
Valve Chest Oil Seal - Martin Baker - 29-01-2025
How does one seal the valve chest on an early block (with screw in core plugs) when there is only a very small land along the upper edge?
RE: Valve Chest Oil Seal - Charles P - 29-01-2025
(Yesterday, 04:55 PM)Martin Baker Wrote: How does one seal the valve chest on an early block (with screw in core plugs) when there is only a very small land along the upper edge?
I'm using a section cut from a silicon baking tray (from Dunelm).
Seals well enough to pass scrutineering