The following warnings occurred: | |||||||||||||||
Warning [2] Undefined property: MyLanguage::$archive_pages - Line: 2 - File: printthread.php(287) : eval()'d code PHP 8.1.31 (Linux)
|
Which Gasket Sealant? - Printable Version +- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum) +-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1) +--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14) +--- Thread: Which Gasket Sealant? (/showthread.php?tid=8545) Pages:
1
2
|
Which Gasket Sealant? - John P - 22-04-2023 For many years I used Hylomar Blue which I found easy to apply and effective. Last year my old tube finally ran out so I bought some new but this seems to be much more viscous and I can't obtain a thin, smooth even coverage as it goes on rather like silicone bathroom sealant. Was I unlucky or has the formulation changed over the years. What would you recommend? John. RE: Which Gasket Sealant? - Charles P - 22-04-2023 Threebond 1215 RE: Which Gasket Sealant? - Steve Jones - 22-04-2023 What Charles said! Steve RE: Which Gasket Sealant? - Nick Salmon - 22-04-2023 Sheesh! Over £17 a tube?! I must be getting old... RE: Which Gasket Sealant? - Steve Jones - 22-04-2023 But it doesn't go off in the tube and so a tube will last you for years. Mine has. Steve RE: Which Gasket Sealant? - Stumpi - 22-04-2023 Did you leave it long enough for the solvents to evaporate. As apprentices we were taught to massage it with a rounded wooden dowel to help. And it wasnt a wind up it was in the company handbook. RE: Which Gasket Sealant? - Steve kay - 23-04-2023 Pretty close to ooh matron there, Andy! RE: Which Gasket Sealant? - Ray White - 23-04-2023 I use Stag Wellseal; developed by Rolls Royce. It also doesn't go off. It used to be called KMC Wellseal - I still have some - but it's the same stuff. Relatively reasonable at £14 a tube. RE: Which Gasket Sealant? - Charles Levien - 24-04-2023 I thought this was discussed fairly recently — a thin coating of Locktite 5920 RTV Copper Silicone seemed to find favor with many. I subsequently bought some and used it to very good effect. RE: Which Gasket Sealant? - AustinWood - 24-04-2023 I always use a thin smear of grease on gaskets. Very economical. |