+- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum)
+-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: Zenith 26VA carburettor (/showthread.php?tid=825)
Zenith 26VA carburettor - Arte-Et-Marte - 14-02-2018
Good evening all.
I'm looking for a little assistance. I'm currently trying to repair a side draught zenith 26VA carburettor, having discovered that a few parts are broken.
I'm looking for an accelerator lever to fit to the butterfly spindle, and an air screw.
I'm actually trying to finish a car prior to having it assessed. The owner passed away earlier this year.
Many thanks, Mike.
RE: Zenith 26VA carburettor - Arte-Et-Marte - 14-02-2018
.... The car is basically complete, we discovered the carburettor had been removed and had to try a bit of common sense investigating. I've had a look inside the inlet manifold and combustion chambers with a bore scope, in case parts of the spindle were in there. We just need to get the engine started for the assessor.
RE: Zenith 26VA carburettor - Derek Sheldon - 14-02-2018
Give Tony Betts a call at County Austin’s 01162867522