+- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum)
+-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: Austin BT12 spanner (/showthread.php?tid=7882)
Austin BT12 spanner - Marcus Ling - 07-08-2022
Hi,
I am hoping that someone who has an original BT12 tappet spanner could post a photo with dimensions as I have been trying to find an original but without any luck and now want to make a replica until I can find an original.
Any help much appreciated.
Cheers
Marcus
RE: Austin BT12 spanner - PeteUU - 08-08-2022
Is the one you want details of single or double ended ?
RE: Austin BT12 spanner - Marcus Ling - 08-08-2022
Hi Pete,
Thank for the reply, I didn't realise there was a double ended BT12. The one I am after is single ended as per the picture from the Parts List.
BT12.JPG (Size: 9.36 KB / Downloads: 477)
Cheers
Marcus
RE: Austin BT12 spanner - PeteUU - 08-08-2022
I rather thought that was the one you are looking for. Me too !
I imagine you have an early Seven to want the single ended version ?
PeteUU
RE: Austin BT12 spanner - Marcus Ling - 08-08-2022
Well I've learnt something new.
Yes there is a double ended version which seems to replace the single ended one at the introduction of the coil engine.
RE: Austin BT12 spanner - JoeRowing - 08-08-2022
I have one I think. I'll check in a bit
RE: Austin BT12 spanner - JoeRowing - 08-08-2022
I have one of the right size and shape but it's marked AH67
RE: Austin BT12 spanner - Marcus Ling - 09-08-2022
Hi Joe,
If its the same would you mind posting a photo with the dimensions please.
Thanks
Marcus
RE: Austin BT12 spanner - JoeRowing - 09-08-2022
Here it is on mm square graph paper. If it's the right thing I'll do a drawing later if I get a chance
RE: Austin BT12 spanner - Marcus Ling - 09-08-2022
Thanks Joe,
That's perfect I can measure it off the graph paper.
Cheers
Marcus