The following warnings occurred: | |||||||||||||||
Warning [2] Undefined property: MyLanguage::$archive_pages - Line: 2 - File: printthread.php(287) : eval()'d code PHP 8.1.31 (Linux)
|
Ignition points - Printable Version +- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum) +-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1) +--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14) +--- Thread: Ignition points (/showthread.php?tid=2749) Pages:
1
2
|
Ignition points - Tiger - 03-05-2019 Hi people Can anyone help, looking for points for Ruby 1936. The ones on A7 workshop and other appear incorrect! I have an idea I may have a Bosch distributor (can’t see any marks) Any idea where a set can be bought. Regards Tim RE: Ignition points - Andy Bennett - 03-05-2019 Tiger the Bosch distributor is quite visually different in that it doesn't have the flattened side bit to the distributor cap. Probably not describing very well but you can see the difference in these ebay items. first is bosch and second in an electronic version of the A7 distributor but shows the flattened bit present on the original: https://www.ebay.co.uk/itm/Austin-7-Seven-Bosch-Type-Distributor/382662827757?hash=item59187b5eed:g:554AAOSwWFFa7J5c https://www.ebay.co.uk/itm/Powerspark-Negative-Earth-Electronic-Distributor-6-12-Volt-DK4A-Style-Austin-7/362175263971?hash=item545353f4e3:g:b4cAAOSwKcZa0MSz if you have Bosch then you just need to look for spares for Bosch 009. Yu can buy from Austin Seven Reproduction Parts or any VW supplier. I bought a replacement cap for £4:95 couple of weeks ago and some points from a VW supplier at the Practical Classics Show. Andy RE: Ignition points - Mark R - 03-05-2019 If it is a Bosch it'd likley be a 009 as used in VW beetle etc, could you post a photograph, or compare it to similar items on Google or eBay? RE: Ignition points - Tiger - 03-05-2019 Hope this includes a photo. RE: Ignition points - Tiger - 03-05-2019 [attachment=6338] Distributor RE: Ignition points - Chris KC - 03-05-2019 That's a Lucas DK4A baseplate. What's the problem with the Seven Workshop points exactly? We have to make do with what we can get hold of these days and replacement parts are not always perfect, but as far as I'm aware their points fit and work OK. RE: Ignition points - Tony Press - 03-05-2019 Looks like a standard Lucas DK4 - David Cochrane Austin 7 Components lists points ! http://www.a7c.co.uk/spares.php#electrical RE: Ignition points - Tiger - 03-05-2019 Thanks Both suggested parts appear to fit the spring securing post on the opposite side. So I don’t see how these could be fitted ? How ever I may be going BONKERS WE WILL SEE TIM RE: Ignition points - Davemayle - 03-05-2019 https://www.theaustinsevenworkshop.com/products/ae0337-contact-points-dk Just imagine the 'sprung' bit turned over in the picture and it will be the same as yours! RE: Ignition points - Bob Culver - 03-05-2019 I presume that in the Seven spirit of old all rejuvenate with an oilstone. It is reckoned unnecessary to remove the pit; just the peak. I run a 1960s car. I think I have replaced the points once in 140,000 miles. |