Switch securing - Printable Version +- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum) +-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1) +--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14) +--- Thread: Switch securing (/showthread.php?tid=2263)

Switch securing - Tiger - 20-01-2019 Hi people Anyone got a securing “spring” for a Ruby ignition/lighting switch? Or any suggestions on how to. Regards            Tim Ps To fix the switch to the dash panel RE: Switch securing - bob46320 - 21-01-2019 You could wind your own. Get some 16 SWG wire from a model shop and wind it around a wooden former. You would need to experiment a bit to find a former the right size, probably 2/3 the diameter of the switch body. From memory, you would need about 5 turns. RE: Switch securing - Ruairidh Dunford - 21-01-2019 A suitable jubilee clip will work if you are stuck. Or buy a whole new unit: https://www.theaustinsevenworkshop.com/products/ae0483-ignition-warning-light RE: Switch securing - Timothy P - 21-01-2019 Was it this one you are after for the Lucas PLC switch? Photo is from Paul Beck Vintage Supplies who sell them LINK RE: Switch securing - Tiger - 21-01-2019 Thanks Timothy that’s exactly what I need. Tim J