The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.31 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
another on ebay
#1
This saloon suitable for restoration looks a bit dear to me at £4k, is it?  https://www.ebay.co.uk/itm/375082878899?...R_SoltWBYw

Is it on Ruby 17 inch wheels? Will that improve the gearing or be too big a change?

And what looks to be wrong with the position of the back wheel here?

   
Reply
#2
HC head! Bowdenex front brakes! Timber from Indian building materials pallet! Oh, and some exclamation marks.
Reply
#3
Interesting cross-over model: RN-style waist moulding but no vertical rear seams, 4-speed gearbox and RP-style instrument panel.
Reply
#4
Looks in good order, correct wheels and tires and a days work would see it going. A rare fixed head model.
Reply
#5
I have long wondered if this model and the RP would originally have had a moulded rubber cover to the gearbox. It has been mentioned by some that there would have been, but no one I know has actually seen one. 
This car seems to have the remains of a moulded gearbox cover, see the strengthening ribs and raised moulded edge around the gear lever turret.
I have found that covering the gearbox has a major impact on the noise levels in the car, helps prevent fumes entering the cabin and no doubt heat/dust/insects etc. 
If that is a genuine cover, I think it would be good to get an impression from it, so that new ones could be moulded.
However perhaps you know more/better/have one already?
I would be delighted to hear more please
Reply
#6
I would think the rubber gear box cover has been picked up from a scrap yard as have the 17" wheels.why put the gear markings on twice?
Reply
#7
Close-ups


Attached Files
.jpg   4-speed gearbox cover possibly 2.jpg (Size: 149.29 KB / Downloads: 659)
.jpg   4-speed gearbox cover possibly.jpg (Size: 288.07 KB / Downloads: 661)
Reply
#8
It looks like the remains of a Big7 gearbox cover.
Reply
#9
A similar question arose on Facebook when someone posted a pic of a rare Ruby rubber gearbox cover. I have my doubts. As Ruairidh says I think they are either Big Seven (or Ten) ones, repurposed. Box saloons did have tunnel covers though...

   
Reply
#10
(27-11-2023, 09:43 PM)Ruairidh Dunford Wrote: It looks like the remains of a Big7 gearbox cover.

It's not Big 7, they have a moulded piece to cover the gear lever, rather than the bead shown. Maybe Austin 10?
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)