Joined: Jun 2018 Posts: 28 Threads: 2
Reputation:
0
Hi all. A little bit of advice needed.
Is anyone making or selling the channel that for a Mk 1 Ruby is fixed to the glass on the side windows that the regulator slides back and forth on the to raise and lower the window?
I have one complete and one that is sort of half missing.
Any help much appreciated.
Cheers
Jason
Joined: Aug 2017 Posts: 773 Threads: 33
Reputation:
16
Location: Beautiful Northumberland
Car type: 1933 RP Saloon (aka Mildred)
Hi Jason
you might want to wait until some of our cherished suppliers are back from the centenary event to ask your question as people like Tony Betts may have something in his shed.
Andy
Enjoy yourself, it's later than you think!
Joined: Jun 2018 Posts: 28 Threads: 2
Reputation:
0
Yes! Well I assume so. The description sounds right.
Thanks Jamie.
Cheers,
Jason
Joined: Aug 2017 Posts: 725 Threads: 38
Reputation:
12
Location: Herefordshire
Hi Jason. I assume that you're referring to the steel channel that's actually part of the door, or were you thinking of the felt-lined rubber channel that fits inside it?
Joined: Jun 2018 Posts: 28 Threads: 2
Reputation:
0
That’s correct. The channel that fixes to the glass.
Joined: Jun 2018 Posts: 28 Threads: 2
Reputation:
0
Does anyone have one of these they wish to sell? Not getting a response from Oxfordshire sevens.
Joined: Jun 2018 Posts: 28 Threads: 2
Reputation:
0
It looks close but not sure the channel for the roller is long enough
