19-05-2022, 09:15 AM
Just carrying out last checks on my ‘36 ARQ Ruby prior to the Eurotour next week, we leave for Dover on Monday, but out of the blue the electric horn seems to have given up the ghost.
It looks like a “Lucas Altette” type but has no visible outside makers marks to confirm its origin. The horn was with the car when purchased in 1984. It is like the high frequency type shown in the companion.
Have checked continuity on all wiring to and from horn push on the steering column to the junction box and on to the cut out unit and thro to the horn unit itself with a circuit tester and all appears ok.
Have checked all fuses and cleaned the horn push area with brake cleaning fluid and a brush.
Then checked the earth connection and this failed, result I thought, but having now established a good earth to the unit, again tested with the circuit tester, the horn still remains silent.
Any ideas as to what the problem inside the horn could be would be helpful, or any ideas on a quick cheap replacement to have as a temporary fix to make Ruby road legal for the trip would be very much appreciated.
Cheers
It looks like a “Lucas Altette” type but has no visible outside makers marks to confirm its origin. The horn was with the car when purchased in 1984. It is like the high frequency type shown in the companion.
Have checked continuity on all wiring to and from horn push on the steering column to the junction box and on to the cut out unit and thro to the horn unit itself with a circuit tester and all appears ok.
Have checked all fuses and cleaned the horn push area with brake cleaning fluid and a brush.
Then checked the earth connection and this failed, result I thought, but having now established a good earth to the unit, again tested with the circuit tester, the horn still remains silent.
Any ideas as to what the problem inside the horn could be would be helpful, or any ideas on a quick cheap replacement to have as a temporary fix to make Ruby road legal for the trip would be very much appreciated.
Cheers