The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.31 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Excellent number plate font
#11
LDear Stuart

Not the same number , but the same registration area.
“BF” for Dorsetshire was withdrawn in 1904, as the 100 or
so toffs in the County, were fed up with the peasants calling
them “ Bloody Fools” so they petitioned Parliament and most
swapped their numbers for an”FX” Mark
In 1921 BF was actually banned.

It was only when DVLA started to issue
Age related marks and when they ran out
Of other sequences they decided to start issuing
BF after a gap of over 100 years!

Regards

Bill G
Based near the Scottish Border,
Reply
#12
I was quite surprised how irregular some of the original plates were. Here is my car, pictured when only 4 years old on The Motor cover... so likely original. Similarities with font that Chris KC has used.


Attached Files Thumbnail(s)
   
Reply
#13
Yes, that was a great comfort to me Jon - I looked at loads of old pics and realised that many were quite atrocious!
Reply
#14
Does anyone recognise Chris Garner's 28 Saloon reg type face. I rather like the numbers.
Reply
#15
Looks to me that the Nippy numberplate would have been hand painted and not
Therefore a proprietary “font” as the sizing of the numbers looks variable!

The blurb for LUTZ / Alpine Headline ( circa 1996)says is was derived
From old number plates. The prewar regs specified height, width , spacing and letter stroke width
but did not define the style of the lettting , except serifs were not usually usedfrom the 1920’s onwards.

Happy painting

Bill G
Based near the Scottish Border,
Reply
#16
surely most pre 1936 cars were hand painted by the inhouse signwriter, unless customers wanted (and paid more for) more posh standardised, aluminium letters affixed?
Reply
#17
A friend of mine is a retired sign writer and he informed me that the painting of the registration plates was the apprentices job.
Reply
#18
I don't think so - well, not necessarily at least. My 1933 Box saloon had it's original plates on it when I acquired it and they were 'Hills' backing plates and rivet on cast aluminium letters form the same supplier. I think that was quite a common approach...
Reply
#19
(15-02-2018, 11:03 PM)Mike Costigan Wrote: Just take a brave pill and have a go; take your time and use a small paint brush. I did these (the British plate, not the US one!) a few years ago by roughly drawing the outline of the figures with a fine felt-tip and then carefully easing the paint out to the edge, then filling in when I was happy with the outline. incidentally, I used a cream paint rather than white, and to my eye it was just the right colour. I must admit the thought of painting direct onto the body panel might have put me off ...

Can you tell what the car is, I assume it's American and 1914?
Cheers

Mark
Reply
#20
Yes, 1914 American: It's a Saxon Model A, 1400cc 4-cylinder, 2-speed transaxle, performance up to 30mph similar to a chummy, thereafter seriously limited by road surface and traffic!


.jpg   1915 Saxon.jpg (Size: 36.21 KB / Downloads: 189)
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)