| The following warnings occurred: | ||||||||||||
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.31 (Linux)
|
|
Oil jet blockage
|
I would 3rd the Diesel idea. Although id only take half the oil out first - running the stuff neat may be somewhat overkill. Diesel is an excellent lubricator so shouldn't do any harm for a short time.
It did a terrific job of fixing a noisy lifter on my old 3L BMW Z4 
10-05-2021, 06:24 PM
Hi All
For completeness here is a couple of pics of my oil pressure warning light. The switch was £18 from Tameson and the warning light about £6 off eBay. I made up the T piece but I think you could probably find one on eBay. https://tameson.com/measurement-control/...ector.html So far it seems to work OK. It is set at 16psi which might be a bit high and the light glows brightly on start up but soon goes off as the oil warms up. Cheers Howard PS The second image insists on being sideways and I can’t seem to change it! |
|
« Next Oldest | Next Newest »
|
