Joined: Jun 2020 Posts: 3 Threads: 0
Reputation:
0
Location: Biggleswade
Car type: Austin 7 28 top hat saloon
I have had satisfactory magneto rebuilds - that includes armature being rewound - by Armoto Ltd. They are based in Chesterfield. It's a tiny company, but they are probably the only company in UK that can offer magneto rebuilds that are well tested.
It's always good to have a spare magneto to hand. When not in use, my magnetos are stored in the airing cupboard. Dry and warm. That way they are ready for use.
73.
Joined: Aug 2017 Posts: 502 Threads: 13
Reputation:
8
You have come a long way - well done sir.
I love R type saloons.
I think a BLIC mag would be good on that car.
They are about.
I use Ribblesdale in Preston for mags, find them to be very good.
Joined: Feb 2018 Posts: 367 Threads: 14
Reputation:
0
Location: Western Brittany (France)
I use myself brightsparkmagnetos (Bill Brown bill@brightsparkmagnetos.com). They are in England but Bill himself lives and works in Normandy, very convenient for us! After the work mags are first tested cold and warm in an oven. Superb work.
Joined: Aug 2017 Posts: 881 Threads: 48
Reputation:
4
Location: North Wiltshire
Car type: 1927 Chummy, 1938 Big Seven 1/2 a Trials Chummy
I do have a complete and working BLIC and also an ML RF4 requiring some additional parts. However, my experiences over the last thirty years with vintage magnetos has not been good, involving some (very) long walks. The Lucas SR4 solution has always been absolutely bulletproof.
Probably doesn't look so good but has saved my shoe leather!
Joined: Feb 2018 Posts: 367 Threads: 14
Reputation:
0
Location: Western Brittany (France)
When having a mag rehearsed it is important to have a modern capacitor installed. Ceramic ones are a must there. Plus they are so small that they can be hidden.
Joined: Jun 2020 Posts: 3 Threads: 0
Reputation:
0
Location: Biggleswade
Car type: Austin 7 28 top hat saloon
Your restoration diary has been inspiring and a useful guide for the work on my '28 Top Hat. I've only had it since 1962 and I am into the glazing stage of the 3rd rebuild. I can't say restoration, because that might imply 'showroom' condition. In 1963 I used BMC Mini aluminum window guides.They were the correct length and felted. They were however, 1 mm too wide and overlapped the wood frame. I did search for a source of BMC Mini window channels, but the only ones I could find where rubber/plastic/felted. I have now used extruded half inch aluminum channel. It compares very well with the only original window channel piece I have from 50 odd year ago.
Question: So were the window channels you used the original and/or from another source?
Joined: Aug 2017 Posts: 926 Threads: 22
Reputation:
10
Location: Near Cambridge, UK
Car type: 1928 tourer (mag type), short chassis Gould Ulster
Bill Brown always fits an 'Easicap' if I have the spelling right. They are very compact and fit whare they are accessible, under the points.
Joined: Feb 2018 Posts: 367 Threads: 14
Reputation:
0
Location: Western Brittany (France)
Right Robert that's what he put on my mag. That's the ceramic ones I told above. Those are better and more reliable than old technology paper caps. One can let the old one "for show" (disconnected) if needed.
