Iam away to embark on a single seater build, I have been looking at various options etc and Iam now thinking of building the car with the seat offset so not central to the chassis.
I understand this will put more weight on the one side with a driver but think it will allow a faster build and will be easyer to get into and out of as you don't need to straddle the gearbox.
Photo attached is from the Book, Would Suit Enthusiast, does anyone have a photo showing the other side of the car, or indeed any photos showing this arrangement from the other side, and all the images I can find are from the driver side.
06-09-2020, 01:19 PM (This post was last modified: 06-09-2020, 01:19 PM by stuartu.)
For a moment I was flattered. I thought you might actually have a copy of my book.
Were that so, the facing page and, indeed, the two previous pages would have given you the information you required.
I'm a little confused. I thought it was the drivetrain that was offset, not the driver. That surely requires a little time and effort to construct a rear axle with the differential to one side... or as usual am I missing something?
(06-09-2020, 01:19 PM)stuartu Wrote: For a moment I was flattered. I thought you might actually have a copy of my book.
Were that so, the facing page and, indeed, the two previous pages would have given you the information you required.
Regards,
Stuart
Stuart, I do have the book, and I've had a look back and see what you mean now, I didn't appreciate that it was the same car,
