The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.31 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval



Austinsevenfriends › Austin Seven Friends Forum › Forum chat... v
Brake Brake Brake!

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Threaded Mode
Brake Brake Brake!
Charles P Offline
Eternal Repairer
*****
Joined: Aug 2017 Posts: 1,534 Threads: 60
Reputation: 20
#11
27-08-2020, 09:06 PM
Looks like Green Gripper lining material
Reply
Colin Reed Offline
Senior Member
****
Joined: Aug 2017 Posts: 313 Threads: 9
Reputation: 6
Location: TINOPAI NZ
#12
27-08-2020, 09:42 PM
HI STEVE,
It might just be the photo but the contact patch appears to only be half the area of the lining, if it is a soft lining you will still need to match to the drum.
PAUL made an attachment to do just that would be worth contacting

Colin 
NZ
Reply
Bob Culver Offline
dogged member, NZ
*****
Joined: Aug 2017 Posts: 2,748 Threads: 31
Reputation: 95
Location: Auckland, NZ
#13
27-08-2020, 10:06 PM
It has the apearance of the traditional soft linings sold by major manufacturers at least until 1970s . i have never been sure what is meant by woven linings but perhaps it is these. The open look goes as wear. If NOS (or made overseas) likely asbestos
Reply
Paul N-M Offline
Member
***
Joined: Aug 2017 Posts: 226 Threads: 9
Reputation: 5
Location: Edinburgh/Lothians
Car type: Seven Special
#14
28-08-2020, 08:40 AM (This post was last modified: 28-08-2020, 08:43 AM by Paul N-M.)
My brake bedding in tool.
Hole in drum is to access adjuster cams. (hydraulics)
Drum skimmed to allow for 3M abrasive thickness.
Lever was made for other job and modified to suit this as well.
Photos should explain.
Photo


Attached Files Thumbnail(s)
           
http://www.vintageandclassicworckshops.com
Reply
Steve Jones Offline
Pass the hammer
*****
Joined: Aug 2017 Posts: 1,462 Threads: 26
Reputation: 17
Location: North Yorkshire
#15
28-08-2020, 08:55 AM
That's Green Gripper, Steve. Modern soft lining from a good source. Fitted to all the brakes in my three cars and used by many, many others.

Steve
Reply
Charles P Offline
Eternal Repairer
*****
Joined: Aug 2017 Posts: 1,534 Threads: 60
Reputation: 20
#16
28-08-2020, 10:36 AM
(28-08-2020, 08:40 AM)Paul N-M Wrote: My brake bedding in tool.
Hole in drum is to access adjuster cams. (hydraulics)
Drum skimmed to allow for 3M abrasive thickness.
Lever was made for other job and modified to suit this as well.
Photos should explain.


I like that.

Charles
Reply
Paul N-M Offline
Member
***
Joined: Aug 2017 Posts: 226 Threads: 9
Reputation: 5
Location: Edinburgh/Lothians
Car type: Seven Special
#17
28-08-2020, 10:49 AM
I have tried GG lining material and concluded it is probably best suited to rod/cable systems which work at comparatively low pressure. It has quite a high mu but is soft.
Properly bedded in should be ideal for original set ups.

I found that on my hydraulic set up the pressure and temperature generated led to a build up of black gooy brake dust sticking to the shoe which seriously comprimised its performance.
http://www.vintageandclassicworckshops.com
Reply
Steve kay Online
Posting Freak
*****
Joined: Aug 2017 Posts: 1,641 Threads: 93
Reputation: 15
Location: Monmouthshire
#18
28-08-2020, 07:47 PM
Many thanks to all for responses, Green Gripper sounds a splendid way of slowing the beast when all 747 of its cubic centimetres are propelling it along!
Reply
Bob Culver Offline
dogged member, NZ
*****
Joined: Aug 2017 Posts: 2,748 Threads: 31
Reputation: 95
Location: Auckland, NZ
#19
28-08-2020, 08:25 PM
The position of the leading edge relative the pivot has a huge influence on the self servo effect so until fully bedded operation is affected. (why filing back can reduce grabbing)
Reply


Forum Jump:


Users browsing this thread: 4 Guest(s)