| The following warnings occurred: | ||||||||||||
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.31 (Linux)
|
|
Chassis felt?
|
13-03-2020, 02:15 AM
+1 for the 3mm closed cell, self adhesive black foam !
On the Chummy in the past I have used a bituminous membrane from the roofing industry, over here called 'Malthoid'. Not a speck of rust, 50 years in the shed and counting 
13-03-2020, 09:18 AM
(This post was last modified: 13-03-2020, 09:19 AM by andrew34ruby.)
Does it actually need the felt? Or anything? Mine had the original felt, and rigid spacer pieces at each bolt position. And no rust.
When I had the body off I replaced the spacers with plastic, slightly thicker, and no felt. There is a slight gap where the felt used to be. And we now have a smaller chopping board in the kitchen. 
13-03-2020, 03:42 PM
I use 3mm thick Foamex plastic which will crush and absorb any small irregularities.
13-03-2020, 08:24 PM
on my TVR Vixen, felt was used on the body-to-chassis mounts and after a decade or three / four..havoc had wreaked.. so I'd abstain from felt; be it soaked in oil or whatever..
On my Triumph TR2 I've used a proprietary 'body mounting kit' consisting of broad rubber strips that looked and felt like licorice. That stuff should still be available from TR specialists..... just my 2 pennies..... 
13-03-2020, 09:31 PM
When I first saw the title of this thread I thought the investigators had found another (alleged) victim of Alex Salmond...
|
|
« Next Oldest | Next Newest »
|
