Joined: Mar 2018 Posts: 45 Threads: 6
Reputation:
0
Location: Maryland, USA
Car type: Austin Ruby ARQ LHD 1936
This once happened to my Ford 8N tractor. I pointed it at the door and started in gear. Once in the open I got into 3rd (out of 4) and accelerated briskly (for a tractor) with the clutch fully depressed. The clutch popped free immediately. No big thing, with no lasting repercussions. I would certainly give something similar a shot before I took anything apart. Good luck, Mike
Joined: Aug 2017 Posts: 3,005 Threads: 168
Reputation:
37
Location: Sherwood Forest
Car type: 1938 Talbot Ten Airline
Yup! That's the way I've always done it, including several Sevens over the years; get the engine warmed up first, then it will start easily in gear without overloading the starter.
Joined: Aug 2017 Posts: 952 Threads: 38
Reputation:
7
I definitely wouldn’t start the engine with loose cover plate, it’s not spring pressure holding the clutch
so no point in slackening the bolts and then starting it.
Try previous suggestions re starting it in gear and driving with the clutch pedal depressed you will find it will come free.You could also prod the throttle while driving to put some shock loading into it.
Joined: Sep 2017 Posts: 51 Threads: 19
Reputation:
0
Thanks to all you folks who took the time and trouble to reply with helpful suggestions, much appreciated.
The solution, as was suggested, was to get engine hot, start up in gear with clutch pedal floored and drive. Only had to go a few dozen yards for clutch to free.
Joined: Oct 2017 Posts: 1,504 Threads: 54
Reputation:
8
Thanks for letting us know of your success, the suspense was unbearable.
Joined: Aug 2017 Posts: 2,400 Threads: 33
Reputation:
36
Location: Deepest Frogland 30960
Car type: 1933 RP Standard Saloon
Aye, it was gripping. Now it's not.
Joined: Aug 2017 Posts: 193 Threads: 11
Reputation:
0
Location: Oxfordshire
To prevent the clutch seizing when over wintering old tractors, I've seen the clutch pedal kept fully depressed with a block of wood.