Joined: Aug 2017 Posts: 952 Threads: 38
Reputation:
7
Nice manifold, who did that one?
Joined: Aug 2017 Posts: 2,400 Threads: 33
Reputation:
36
Location: Deepest Frogland 30960
Car type: 1933 RP Standard Saloon
I dont get it Steve. The manifold in the picture isn't the same as the one fitted to the engine? The bend on n°4 is different.
Joined: Aug 2017 Posts: 1,462 Threads: 26
Reputation:
17
Location: North Yorkshire
23-02-2019, 09:58 AM
(This post was last modified: 23-02-2019, 10:03 AM by Steve Jones.)
It is, Bruce. It's just the angle of the photo that makes it look different.
Made by Ryan Edwards at Bicester.
Steve
Joined: Aug 2017 Posts: 1,337 Threads: 34
Reputation:
30
Location: Cheshire
Car type: Race Ulster, 1926 Special, 1927 Chummy, 1930 Box
23-02-2019, 11:37 AM
(This post was last modified: 23-02-2019, 11:43 AM by Alan.)
HThat’s nice - did you take the car there to get it done or are they off the shelf?
Alan Fairless
Joined: Sep 2018 Posts: 157 Threads: 11
Reputation:
0
I quite like such sporty things (isn't that a John Barlowe inlet manifold??) and I don't really don't want to be the Killjoy but have you or haven't you fitted a heat shield??? If not you might consider one as the exhaust manifold now seems to be quite a nice 'rechaud' for the fuel……
Joined: Aug 2017 Posts: 1,462 Threads: 26
Reputation:
17
Location: North Yorkshire
No, no heat shield. This manifold replace one that's been in place since I built the car in 2013 and that has since done 5 full seasons of Hill Climbs and Sprints, usually double entered (the equivalent of 55 events in total), together with a fair bit of road mileage each year with no fuel issues so far.
Steve
Joined: Aug 2017 Posts: 1,532 Threads: 60
Reputation:
20
23-02-2019, 06:18 PM
(This post was last modified: 23-02-2019, 06:20 PM by Charles P.)
Be interesting to see what the difference is from an improved manifold.
And I can see your lambda sensor boss, so you're getting serious....
C
20190222_143221.jpg (Size: 23.3 KB / Downloads: 463)
