Joined: Aug 2017 Posts: 226 Threads: 9
Reputation:
5
Location: Edinburgh/Lothians
Car type: Seven Special
Hi Terry and all,
Can your recommend someone who can do this as you described? Most I've asked are only set up for 3/4 rad.
Thanks,
Paul N-M
Joined: Aug 2017 Posts: 327 Threads: 1
Reputation:
19
Location: Bristol
Use 1.6"radius for all followers as no one does asymmetric anymore as they are not cost effective, try Paul Bonewell or David Dye. Terry.
Joined: Aug 2017 Posts: 226 Threads: 9
Reputation:
5
Location: Edinburgh/Lothians
Car type: Seven Special
Thanks Terry,
Dave Dye can only do 1.2" and I'm waiting for more info from Paul Bonewell. I did not explain I was using a Newman cam so hopefully Paul can help, fingers crossed.
Joined: Aug 2017 Posts: 1,704 Threads: 47
Reputation:
25
Location: Auckland NZ
Car type: 36 Nippy, 31 RM, 38 Special, 24 Works Rep
They are aluminium with steel caps, intended to reduce weight and valve bounce in a high rpm race engine. I have not personally gone down this route so cant comment first hand on their effectiveness, although I have heard claims of success.
Black Art Enthusiast