The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.30 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Austin 7 Clutch
#2
https://archive.a7ca.org/collections/han...arts-lists

It might be worth looking at the parts list for your friend’s car at the location above. The illustrations therein are drawings and not always 100% accurate but they should give you a clue. There are no splines on the clutch cross shaft. The pedal for the 4 speed box is clamped by its bolt and can be rotated wrt to the shaft. There is a slot in the other end of the shaft which gives you a chance of rotating it enough to gain adjustment. The three speed box pedal is secured by a cotter pin and is barely adjustable. If your friend’s car has a 3 speed box the problem most likely lies within the bell housing.

Hope this is some help.

Regards

Stuart
Reply


Messages In This Thread
Austin 7 Clutch - by lencot1938 - 01-03-2024, 12:56 PM
RE: Austin 7 Clutch - by stuartu - 01-03-2024, 01:55 PM
RE: Austin 7 Clutch - by AustinWood - 01-03-2024, 03:23 PM
RE: Austin 7 Clutch - by Howard Wright - 01-03-2024, 06:33 PM
RE: Austin 7 Clutch - by Rogerpugs - 01-03-2024, 11:04 PM
RE: Austin 7 Clutch - by lencot1938 - 02-03-2024, 11:37 AM
RE: Austin 7 Clutch - by Reckless Rat - 02-03-2024, 12:22 PM
RE: Austin 7 Clutch - by stuartu - 02-03-2024, 12:34 PM
RE: Austin 7 Clutch - by lencot1938 - 03-03-2024, 10:46 AM
RE: Austin 7 Clutch - by lencot1938 - 04-03-2024, 10:36 AM
RE: Austin 7 Clutch - by Reckless Rat - 04-03-2024, 11:35 AM
RE: Austin 7 Clutch - by lencot1938 - 16-03-2024, 10:10 AM
RE: Austin 7 Clutch - by Reckless Rat - 16-03-2024, 11:40 AM
RE: Austin 7 Clutch - by lencot1938 - 16-03-2024, 01:25 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)