25-02-2024, 01:22 PM
Hi all, I’m new to the A7 gang having purchased my 1933 PD about a month ago, so sorry if this has been covered before.
The car judders (tramps) violently when reversing, especially if turning at the same time. I’ve been told that it’s a characteristic of A7s but I’ve not seen any as bad as mine.
Having read some guidance on the Cornish club forum I suspected the flange on the end of the pinion being loose, but having removed the prop shaft, it isnt loose. The hardy Spicer joint is good, and the attachment of the front of the torque tube to the chassis is firm.
Any wisdom would be appreciated.
T
The car judders (tramps) violently when reversing, especially if turning at the same time. I’ve been told that it’s a characteristic of A7s but I’ve not seen any as bad as mine.
Having read some guidance on the Cornish club forum I suspected the flange on the end of the pinion being loose, but having removed the prop shaft, it isnt loose. The hardy Spicer joint is good, and the attachment of the front of the torque tube to the chassis is firm.
Any wisdom would be appreciated.
T