27-01-2024, 10:20 AM
(This post was last modified: 27-01-2024, 04:53 PM by Nick Lettington.
Edit Reason: Chubby fingers and disinformation!
)
Originally, the wing stay and headlight bracket would have been as one, like the first picture I posted. If you have no bracket on the stay, that might be one way of getting the position correct, though if things don't line up as they should, you're likely to lock in the error. Can you see where the old bracket was attached to the wing stay? That might help. Failing that, it might be worth asking for measurements from someone who has one not currently attached to their Ruby.
As for the photo Squeak referred to... this is a view of top and underside. The hole that's ringed red bolts to a piece of steel fixed to the edge of the wing in the rolled edge, the headlight hole is ringed orange.
As for the photo Squeak referred to... this is a view of top and underside. The hole that's ringed red bolts to a piece of steel fixed to the edge of the wing in the rolled edge, the headlight hole is ringed orange.