21-01-2024, 04:04 PM
I doubt figures were ever published Matthew.
The first two on your list need to be good and tight - probably as tight as you can realistically get them without making special tools. Use the appropriate lock washers etc. In all three cases pay close attention to the condition of the mating parts and make the joint as 'clean' as you possibly can - all nice and square and flat with no burrs, dirt or other defects.
The first two on your list need to be good and tight - probably as tight as you can realistically get them without making special tools. Use the appropriate lock washers etc. In all three cases pay close attention to the condition of the mating parts and make the joint as 'clean' as you possibly can - all nice and square and flat with no burrs, dirt or other defects.