20-01-2024, 04:52 PM
(This post was last modified: 20-01-2024, 04:55 PM by Martin Baker.)
Out of interest, here is the website for ARP bolts: https://arp-bolts.com/.
The advice I was given is that they should only be re-used 3-4 times and they are very expensive. Last time I spoke to Alex Myall he was using an even higher spec bolt which could be used a greater number of times but even more costly! Remember they are designed to stretch to maintain load. John Barlow's version is just a normal boilt which I would be nervous of using.
Just for fun have a look at the Saenz conrod manufacturers website: https://saenzgroup.net/
The advice I was given is that they should only be re-used 3-4 times and they are very expensive. Last time I spoke to Alex Myall he was using an even higher spec bolt which could be used a greater number of times but even more costly! Remember they are designed to stretch to maintain load. John Barlow's version is just a normal boilt which I would be nervous of using.
Just for fun have a look at the Saenz conrod manufacturers website: https://saenzgroup.net/