08-01-2024, 03:50 PM
(This post was last modified: 08-01-2024, 03:54 PM by Nick Lettington.
Edit Reason: to add a suggestion for a bodge (sorry... it's in my nature)
)
http://www.da7c.co.uk/technical_torque_a...l_tap.html
This looks like the image you're after
...but rather than making something from scratch, would it not be easier to start with a vertical motorcycle tap with a reserve and add a 45degree bend to the reserve inlet as per the tap pictured here so it would work horizontally?
This looks like the image you're after
...but rather than making something from scratch, would it not be easier to start with a vertical motorcycle tap with a reserve and add a 45degree bend to the reserve inlet as per the tap pictured here so it would work horizontally?