05-05-2018, 07:49 AM
(05-05-2018, 07:02 AM)JonE Wrote: thanks. So 93 to be made to same shape as here?
By the way, does 86 have any function in adjustment, or is it just as fastener?
The outer end of 93 is the brake lever stop. Wear in the brake pivots and the end here cause the brake adjusting screw to hit the coupling bolts- solution pull the handbrake on a notch to stop the clicking !
The shaped end on the screw 86 fits into the vertical slot on the gear lever ball (just visible in the picture) and holds the lever in position (otherwise it would just rotate uselessly around the ball)
The screw end and the ball slot are usually quite worn allowing the gear lever too much free movement.
Cheers, Tony.