04-05-2018, 06:15 AM
Hi Colin,
Thanks for the post, this is exactly the same issue that I'm dealing with but for two different reasons. This first one is that I've got a long steep driveway and when I reverse up I get a lug of oil coming out through the crank handle, I need a solution to keep engine oil in (and thus my wife off my back). The second issue is that I'm planning a drive in to some very remote and dusty areas of Australia so I need a solution to keep very fine dust entering the sump via the crank handle. I was looking for a lip seal that I could use matched with a speedi sleeve on the handle. If I get a good result I'll let you know.
Thanks for the post, this is exactly the same issue that I'm dealing with but for two different reasons. This first one is that I've got a long steep driveway and when I reverse up I get a lug of oil coming out through the crank handle, I need a solution to keep engine oil in (and thus my wife off my back). The second issue is that I'm planning a drive in to some very remote and dusty areas of Australia so I need a solution to keep very fine dust entering the sump via the crank handle. I was looking for a lip seal that I could use matched with a speedi sleeve on the handle. If I get a good result I'll let you know.