03-05-2018, 01:56 PM
(This post was last modified: 03-05-2018, 01:59 PM by dannyteal1990.)
Thanks for all the feed-back. It seems I would be better placed fabricating something for the back. I'm inclined to keep the tank in-case I ever want to use a rear fuel tank and remove the scuttle one....
The tank is held on using a bracket purchased from Cambridge Engineering (Bill Williams). This is mounted directly to the back of the chassis so it should be good to go weight wise!
This is how we collected the car (rear axle has now been replaced so its on its own wheels again).
See below from previous owner.
(sorry for the quality of this one, its a picture of a picture)
The tank is held on using a bracket purchased from Cambridge Engineering (Bill Williams). This is mounted directly to the back of the chassis so it should be good to go weight wise!
This is how we collected the car (rear axle has now been replaced so its on its own wheels again).
See below from previous owner.
(sorry for the quality of this one, its a picture of a picture)